maximal error meaning in Chinese
最大误差
Examples
- By testing the corrected image map , the mean error of point position was 1 meter , the maximal error was 2 meters , length distortions on x and y axis orientation were not more than 1 % and angle distortion was almost not existing
经检验，单点定位平均偏差为1m左右，最大偏差为2m左右，在x 、 y方向上的长度变形均不大于1 ，基本没有角度变形。 - Based on the experiments , the simulation of the heat exchanger and scroll compressor was accomplished which also offered a favorable condition to the establishment of the whole gwshp methods were used to improve the veracity and astringency of the model , such as : dividing the condenser into several tiny segment with equal area ; separating the condensing process into single - phase region and double - phase region ; the comparing result showed that most of the error between the data of simulation and experiment was within 5 % while the maximal error was 8 . 35 %
在建模过程中，从大量蒸发和冷凝的换热关联式中，通过与实验数据的比较找出了与实验结果最为接近的换热关联式在建模过程中，针对冷凝器及板式换热器的特点，采取将冷凝器按面积分成若干个微元段，并将冷凝过程分成单相区和两相区的方法。同时对涡旋压缩机进行建模和分析同时在热力学平衡基础上与实验数据比较，经过验证，对于换热器模型，模拟计算与实验结果的误差一般都在5以内，最大为12 。